Oferta! Preamplificador Emotiva XSP1 Ver más grande

Preamplificador Emotiva XSP1

EMOXSP1

Nuevo

Preamplificador estereo con entradas y salidas balanceadas.

Más detalles

490,00 €

Añadir a mis favoritos

Ficha técnica

DisponibilidadVendido

Más

ESPECIFICACIONES TÉCNICAS

  • Line level Input: 2 pairs balanced; 4 pairs unbalanced
  • Home Theater (line level, left, right, sub) Input: 1 set balanced; 1 set unbalanced
  • Processor Loop (line level) Input: 1 pair unbalanced
  • Input Impedance (line level) Input: 50k ohms
  • Phono Input (MM or MC): 1 pair unbalanced
  • Main Outputs: 1 pair balanced; 1 pair unbalanced
    (Main outputs may be configured as flat or high-pass; high-pass is adjustable from 50 Hz to 250 Hz)
  • Subwoofer (left, right, summed) Output: 1 set balanced; 1 set unbalanced
    (Subwoofer outputs may be configured as flat or low-pass; low-pass is adjustable from 50 Hz to 250 Hz)
  • Processor Loop (line level) Output: 1 pair unbalanced
  • Minimum recommended load impedance: 600 ohms
  • Trigger Input and Output: 1 each
    IR input and output: 1 each
  • Gain structure:
    Nominal output level: 0 dBV (1 V)
    Nominal gain (with Volume set to “0”): 1
    Maximum gain: +12 dB
  • High-Frequency and Low-Frequency Trims:
    HF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 12 kHz
    HF trim (inflection point): 4 kHz
    LF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 50 Hz
    LF trim (inflection point): 200 Hz
  • Bass Management:
    Crossover slopes (high-pass and low-pass): 12 dB / octave
    Crossover frequency (high-pass and low-pass): User configurable, 50 Hz to 250 Hz
  • Balanced Input to Balanced Output
    S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 117 dB
    Frequency response: 20 Hz to 20 kHz +/- 0.02 dB
    THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0004%
    IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%
    Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB
  • Unbalanced Input to Unbalanced Output
    S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 113 dB
    Frequency response: 20 Hz to 20 kHz +/- 0.015 dB
    THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0006%
    IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001%
    Crosstalk (measured at +6 dBF, 10 kHz): < 102 dB
  • Balanced Input to Unbalanced Output
    S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 114 dB
    Frequency response: 20 Hz to 20 kHz +/- 0.015 dB
    THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0005%
    IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.0015%
    Crosstalk (measured at +6 dBF, 10 kHz): < 105 dB
  • Unbalanced Input to Balanced Output
    S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 115 dB
    Frequency response: 20 Hz to 20 kHz +/- 0.017 dB
    THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0003%
    IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.007%
    Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB
  • Phono (Moving Coil; phono in to balanced out)
    Gain (1 kHz, Volume at 0): approximately 60 dB
    Input impedance (user selectable): 47 ohms, 100 ohms, 470 ohms, 1k ohm
    S/N (signal-to-noise ratio, A-weighted, ref 1.0 mV in): > 79 dB
    Frequency response (referenced to standard RIAA curve): 20 Hz to 20 kHz +/- 0.35 dB
    THD (total harmonic distortion, ref 1.0 mV): < 0.008%
    IMD (intermodulation distortion, SMPTE method: < 0.15 %
    Crosstalk: < 65 dB
  • Phono (Moving Magnet; phono in to balanced out)
    Gain (1 kHz, Volume at 0): approximately 40 dB
    Input impedance: 47k Ohms
    S/N (signal-to-noise ratio, A-weighted, ref 10.0 mV in, A-weighted): > 96 dB
    Frequency response (referenced to standard RIAA curve): 20 Hz to 20 kHz +/- 0.3 dB
    THD (total harmonic distortion, ref 10 mV): < 0.001%
    IMD (intermodulation distortion, SMPTE method: < 0.05%
    Crosstalk: < 80 dB
  • Power Requirements:
    115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched).
    Power consumption (On): 32 watts
    Power consumption (Standby): <1 watt
  • Dimensions: 17” wide x 6” high x 16.5” deep (includes feet and terminals).
    Boxed: 22" Wide x 19" Deep x 10" High